Web-Auth Login-Attempts; Web-Auth Quiet-Period - Digisol DG-FS4526 Management Manual

4
Command Line Interface
Command
web-auth re-authenticate (IP) Ends the web authentication session associated with the
show web-auth
summary

web-auth login-attempts

This command defines the limit for failed web authentication login attempts. After the
limit is reached, the switch refuses further login attempts until the quiet time expires.
Use the no form to restore the default.
Syntax
web-auth login-attempts count
no web-auth login-attempts
count - The limit of allowed failed login attempts. (Range: 1-3)
Default Setting
3 login attempts
Command Mode
Global Configuration
Example
Console(config)#web-auth login-attempts 2
Console(config)#

web-auth quiet-period

This command defines the amount of time a host must wait after exceeding the
failed login attempts limit, before it may attempt web authentication again. Use the
no form to restore the default.
Syntax
web-auth quiet-period time
no web-auth quiet period
time - The amount of time the host must wait before attempting
authentication again. (Range: 1-180 seconds)
Default Setting
60 seconds
Command Mode
Global Configuration
4-116
Table 4-36 Web Authentication (Continued)
Function
designated IP and forces the user to re-authenticate
Displays a summary of web authentication port
parameters and statistics
www.digisol.com
Mode Page
PE 4-119
PE 4-119