Chapter 1: Introduction; Key Features; Table 1-1 Key Features - Digisol DG-FS4526 Management Manual

Chapter 1: Introduction

This switch provides a broad range of features for Layer 2 switching. It includes a
management agent that allows you to configure the features listed in this manual.
The default configuration can be used for most of the features provided by this
switch. However, there are many options that you should configure to maximize the
switch's performance for your particular network environment.

Key Features

Feature
Configuration Backup and
Restore
Authentication
Access Control Lists
DHCP Client
DHCP Snooping
Port Configuration
Rate Limiting
Port Mirroring
Port Trunking
Broadcast Storm Control
Static Address
IEEE 802.1D Bridge
Store-and-Forward Switching Supported to ensure wire-speed switching while eliminating bad frames
Spanning Tree Algorithm
Virtual LANs
Traffic Prioritization
Quality of Service

Table 1-1 Key Features

Description
Backup to TFTP server
AAA – Authentication, Authorization, and Accounting
Console, Telnet, web – User name / password, RADIUS, TACACS+
Web – HTTPS
Telnet – SSH
SNMP v1/2c - Community strings
SNMP version 3 – MD5 or SHA password
Port – IEEE 802.1X, MAC address filtering
Supports IP and MAC ACLs, 100 rules per system
Supported
Supported with Option 82 relay information
Speed, duplex mode and flow control
Input rate limiting per port
One port mirrored to a single analysis port
Supports up to 12 trunks using either static or dynamic trunking (LACP)
Supported
Up to 8K MAC addresses in the forwarding table
Supports dynamic data switching and addresses learning
Supports standard STP, Rapid Spanning Tree Protocol (RSTP), and Multiple
Spanning Trees (MSTP)
Up to 255 using IEEE 802.1Q, port-based, private VLANs, protocol VLANs,
QinQ tunneling, Voice VLAN
Default port priority, traffic class map, queue scheduling, or Differentiated
Services Code Point (DSCP), IP Precedence, IP TOS, and TCP/UDP Port
Supports Differentiated Services (DiffServ)
www.digisol.com 1-1