Whichboot; Boot System; Table 4-27 File Directory Information - Digisol DG-FS4526 Management Manual

• File information is shown below:
Column Heading
file name
file type
startup
size
Example
The following example shows how to display all file information:
Console#dir 1:
file name
-----------------------------------
D2218
V2271
Factory_Default_Config.cfg
---------------------------------------------------------------------------
Console#

whichboot

This command displays which files were booted when the system powered up.
Syntax
whichboot [unit]
unit - Stack unit. (Range: 1)
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows the information displayed by the whichboot command. See
the table under the dir command for a description of the file information displayed by
this command.
Console#whichboot
file name
-------------------------------------
Unit1:
D2218
V2271
Factory_Default_Config.cfg
Console#

boot system

This command specifies the image used to start up the system.

Table 4-27 File Directory Information

Description
The name of the file.
File types: Boot-Rom, Operation Code, and Config file.
Shows if this file is used when the system is started.
The length of the file in bytes.
file type
--------------
Boot-Rom image
Operation Code
Config File
file type
--------------
Boot-Rom image
Operation Code
Config File
www.digisol.com
DG-FS4526 User Manual
startup size (byte)
------- -------------
Y
Y
Y
Total free space:
startup size (byte)
------- -----------
Y
Y
Y
4
214124
1761944
5197
5242880
214124
1761944
5197
4-77