Table of Contents
Advertisement
show web-auth interface
This command displays interface-specific web authentication parameters and
statistics.
Syntax
show web-auth interface interface
• interface - Specifies a port interface.
• ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-20)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show web-auth interface eth 1/2
Web Auth Status
Host Summary
IP address
Web-Auth-State Remaining-Session-Time
--------------- -------------- ----------------------
Console#
web-auth re-authenticate (Port)
This command ends all web authentication sessions connected to the port and
forces the users to re-authenticate.
Syntax
web-auth re-authenticate interface interface
• interface - Specifies a port interface.
• ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-26)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#web-auth re-authenticate interface ethernet 1/2
Failed to reauth .
Console#
: Enabled
www.digisol.com
DG-FS4526 User Manual
4
4-119
Hide quick links:
Advertisement
Table of Contents
