Upnp Device Advertise Duration; Show Upnp - Digisol DG-FS4526 Management Manual

4
Command Line Interface
Example
In the following example, the TTL is set to 6.
Console(config)#upnp device ttl 6
Console(config)#

upnp device advertise duration

This command sets the duration for which a device will advertise its presence on the
local network.
Syntax
upnp device advertise duration {value}
value - A time out value expressed in seconds. (Range: 6-86400 seconds)
Default Setting
100 seconds
Command Mode
Global Configuration
Example
In the following example, the device advertise duration is set to 200 seconds.
Console(config)#upnp device advertise duration 200
Console(config)#
Related Commands
upnp device ttl (4-319)

show upnp

This command displays the UPnP management status and time out settings.
Command Mode
Privileged Exec
Example
Console#show upnp
UPnP global settings:
Status:
Advertise duration:
TTL:
Console#
4-320
Enabled
200
20
www.digisol.com