Table of Contents
Advertisement
4
Command Line Interface
show system
This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to "Displaying
System Information" on page 3-11.
• The POST results should all display "PASS." If any POST test indicates
"FAIL," contact your distributor for assistance.
Example
Console#show system
System Description: 24 Port 10/100Mbps Layer 2 Switch with 2 Gigabit
Combo Ports
System OID String: 1.3.6.1.4.1.36293.1.1.1.3
System Information
System Up Time:
System Name:
System Location:
System Contact:
MAC Address (Unit1):
Web Server:
Web Server Port:
Web Secure Server:
Web Secure Server Port:
Telnet Server:
Telnet Server Port:
Jumbo Frame:
POST Result:
9yMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Switch Int Loopback Test ..... PASS
Done All Pass.
Console#
show users
Shows all active console and Telnet sessions, including user name, idle time, and IP
address of Telnet client.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
4-70
0 days, 0 hours, 57 minutes, and 56.69 seconds
R&D 5
WC 9
Ted
00-17-7C-0A-C9-F1
Enabled
80
Enabled
443
Enable
23
Disabled
www.digisol.com
Hide quick links:
Advertisement
Table of Contents
