Configuring Mac Authentication For Ports; Figure 3-58 Network Access Configuration - Digisol DG-FS4526 Management Manual

3
Configuring the Switch
Web – Click Security, Network Access, Configuration.
CLI – This example sets and displays the reauthentication time.
Console(config)#mac-authentication reauth-time 3000
Console(config)#exit
Console#show network-access interface ethernet 1/1
Global secure port information
Reauthentication Time
--------------------------------------------------
--------------------------------------------------
Port : 1/1
MAC Authentication
MAC Authentication Intrusion action
MAC Authentication Maximum MAC Counts : 1024
Maximum MAC Counts
Dynamic VLAN Assignment
Guest VLAN
Console#

Configuring MAC Authentication for Ports

Configures MAC authentication on switch ports, including setting the maximum MAC
count, applying a MAC address filter, and enabling dynamic VLAN assignment.
Command Attributes
• Mode – Enables MAC authentication on a port. (Default: None)
• Maximum MAC Count – Sets the maximum number of MAC addresses that can
be authenticated on a port. The maximum number of MAC addresses per port is
2048, and the maximum number of secure MAC addresses supported for the
switch system is 1024. When the limit is reached, all new MAC addresses are
treated as authentication failed. (Default: 2048; Range: 1 to 2048)
• Guest VLAN – Specifies the VLAN to be assigned to the port when MAC
Authentication of 802.1X Authentication fails. The VLAN must already be created
and active. (Default: Disabled; Range: 1 to 4094)
• Dynamic VLAN – Enables dynamic VLAN assignment for an authenticated port.
When enabled, any VLAN identifiers returned by the RADIUS server are applied to
the port, providing the VLANs have already been created on the switch. (GVRP is
not used to create the VLANs.) The VLAN settings specified by the first
authenticated MAC address are implemented for a port. Other authenticated MAC
addresses on the port must have the same VLAN configuration, or they are treated
as authentication failures. (Default: Enabled)
3-86

Figure 3-58 Network Access Configuration

www.digisol.com
: 1800
: Disabled
: Block traffic
: 2048
: Enabled
: Disabled
4-112
4-113