Enabling Igmp Filtering And Throttling; Configuring Igmp Filter Profiles; Figure 3-137 Enabling Igmp Filtering And Throttling - Digisol DG-FS4526 Management Manual

3
Configuring the Switch
Note:
IGMP filtering and throttling only applies to dynamically learned multicast groups.
It does not apply to statically configured groups.

Enabling IGMP Filtering and Throttling

To implement IGMP filtering and throttling on the switch, you must first enable the
feature globally and create IGMP profile numbers.
Command Attributes
• IGMP Filter – Enables IGMP filtering and throttling globally for the switch. (Default:
Disabled)
• IGMP Profile – Creates IGMP profile numbers. (Range: 1-4294967295)
Web – Click IGMP Snooping, IGMP Filter Configuration. Create a profile group by
entering a number in the text box and clicking Add. Enable the IGMP filter status,
then click Apply.
CLI – This example enables IGMP filtering and creates a profile number. It then
displays the current status and the existing profile numbers.
Console(config)#ip igmp filter
Console(config)#ip igmp profile 19
Console(config)#end
Console#show ip igmp profile
IGMP Profile 19
IGMP Profile 25
Console#

Configuring IGMP Filter Profiles

When you have created an IGMP profile number, you can then configure the
multicast groups to filter and set the access mode.
3-216

Figure 3-137 Enabling IGMP Filtering and Throttling

www.digisol.com
4-286
4-287
4-291