Radius-Server Timeout; Show Radius-Server - Digisol DG-FS4526 Management Manual

4
Command Line Interface

radius-server timeout

This command sets the interval between transmitting authentication requests to the
RADIUS server. Use the no form to restore the default.
Syntax
radius-server timeout number_of_seconds
no radius-server timeout
number_of_seconds - Number of seconds the switch waits for a reply
before resending a request. (Range: 1-65535)
Default Setting
5
Command Mode
Global Configuration
Example
Console(config)#radius-server timeout 10
Console(config)#

show radius-server

This command displays the current settings for the RADIUS server.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show radius-server
Global Settings:
Communication Key with RADIUS Server:
Auth-Port:
Acct-port:
Retransmit Times:
Request Timeout:
Server 1:
Server IP Address:
Communication Key with RADIUS Server: ******
Auth-Port:
Acct-port:
Retransmit Times:
Request Timeout:
Radius server group:
Group Name
---------------------
radius
Console#
4-84
1812
1813
2
5
10.1.2.3
1812
1813
2
5
Member Index
-------------
1
www.digisol.com