Figure 3-15 Enabling Telnet - Digisol DG-FS4526 Management Manual

3
Configuring the Switch
Web – Click System, Line, Telnet. Specify the connection parameters for Telnet
access, then click Apply.
CLI – Enter Line Configuration mode for a virtual terminal, then specify the
connection parameters as required. To display the current virtual terminal settings,
use the show line command from the Normal Exec level.
Console(config)#line vty
Console(config-line)#login local
Console(config-line)#password 0 secret
Console(config-line)#timeout login response 300
Console(config-line)#exec-timeout 600
Console(config-line)#password-thresh 3
Console(config-line)#end
Console#show line
Console configuration:
Password threshold:
Interactive timeout: Disabled
Login timeout:
Silent time:
Baudrate:
Databits:
Parity:
Stopbits:
VTY configuration:
Password threshold:
Interactive timeout: 600 sec
Login timeout: 300 sec
Console#
3-26

Figure 3-15 Enabling Telnet

3 times
Disabled
Disabled
9600
8
none
1
3 times
www.digisol.com
4-11
4-11
4-12
4-13
4-13
4-14
4-18