Show Cluster Members; Show Cluster Candidates; Upnp Commands - Digisol DG-FS4526 Management Manual

4
Command Line Interface

show cluster members

This command shows the current switch cluster members.
Command Mode
Privileged Exec
Example
Console#show cluster members
Cluster Members:
ID: 2
Role: Active member
IP Address: 10.254.254.3
MAC Address: 00-17-7c-0a-e2-f1
Description: DG-FS4552
Console#

show cluster candidates

This command shows the discovered Candidate switches in the network.
Command Mode
Privileged Exec
Example
Console#show cluster candidates
Cluster Candidates:
Role
--------------- ----------------- -----------------------------------------
ACTIVE MEMBER
CANDIDATE
Console#

UPnP Commands

Universal Plug and Play (UPnP) is a set of protocols that allows devices to connect
seamlessly and simplifies the deployment of home and office networks. UPnP
achieves this by issuing UPnP device control protocols designed upon open,
Internet-based communication standards.
Command
upnp device
upnp device ttl
upnp device advertise
duration
show upnp
4-318
Mac Description
00-17-7c-0a-e5-51 DG-FS4552
00-17-7c-0a-e2-f1 DG-FS4552
Table 4-1. UPnP Commands
Function
Enables/disables UPnP on the network
Sets the time-to-live (TTL) value.
Sets the advertisement duration of the device
Displays UPnP status and parameters
www.digisol.com
Mode Page
GC
4-319
GC
4-319
GC
4-320
PE
4-320