Configuring Protocol Vlan Interfaces; Figure 3-103 Protocol Vlan Configuration - Digisol DG-FS4526 Management Manual

Web – Click VLAN, Protocol VLAN, Configuration.
CLI - This example shows the switch configured with Protocol VLANs 1 and 2.
Protocol VLAN 1 has been configured with the fixed and preconfigured IP
parameters. Protocol VLAN 2 has been configured based on user defined input for
IPv6 traffic (0x86DD) over ethernet.
Console(config)#protocol-vlan protocol-group 1 add protocol-type ip
Console(config)#protocol-vlan protocol-group 2 add protocol-group 2 add
protocol-type 86DD frame-type ethernet

Configuring Protocol VLAN Interfaces

Use the Protocol VLAN Port Configuration menu to set the protocol VLAN settings
per port.
Command Attributes
• Interface – Port or Trunk indentifier.
• Protocol Group ID – Protocol Group ID assigned to the Protocol VLAN Group.
(Range: 1-2147483647)
• VLAN ID – VLAN to which matching protocol traffic is forwarded. (Range: 1-4094)

Figure 3-103 Protocol VLAN Configuration

www.digisol.com
DG-FS4526 User Manual
3
4-243
3-169