Show Interfaces Counters - Digisol DG-FS4526 Management Manual

4
Command Line Interface
• port-channel channel-id (Range: 1-12)
• vlan vlan-id (Range: 1-4094)
Default Setting
Shows the status for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see "Displaying
Connection Status" on page 3-98.
Example
Console#show interfaces status ethernet 1/5
Information of Eth 1/5
Basic information:
Port type:
Mac address:
Configuration:
Name:
Port admin:
Speed-duplex:
Capabilities:
Broadcast storm:
Broadcast Storm Limit:
Flow control:
Lacp:
Port security:
Max MAC count:
Port security action:
Current status:
Link status:
Port operation status:
Operation speed-duplex: 100full
Flow control type:
Console#show interfaces status vlan 1
Information of VLAN 1
MAC address:
Console#

show interfaces counters

This command displays interface statistics.
Syntax
show interfaces counters [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-26)
4-158
100TX
00-17-7C-0A-C9-F6
Up
Auto
10half, 10full, 100half, 100full,
Enabled
scale:1000K level:5 octets/second
Disabled
Disabled
Disabled
0
None
Up
Up
None
00-17-7C-0A-C9-F1
www.digisol.com