Displaying Vlan Information; Show Vlan - Digisol DG-FS4526 Management Manual

4
Command Line Interface

Displaying VLAN Information

Command

show vlan

show interfaces status vlan
show interfaces switchport
show vlan
This command shows VLAN information.
Syntax
show vlan [id vlan-id | name vlan-name | private-vlan private-vlan-type]
• id - Keyword to be followed by the VLAN ID.
- vlan-id - ID of the configured VLAN. (Range: 1-4094, no leading zeroes)
• name - Keyword to be followed by the VLAN name.
- vlan-name - ASCII string from 1 to 32 characters.
• private-vlan - For an explanation of this command see "show vlan
private-vlan" on page 4-242
- private-vlan-type - Indicates the private vlan type.
(Options: Community, Isolated, Primary)
Default Setting
Shows all VLANs.
Command Mode
Normal Exec, Privileged Exec
Example
The following example shows how to display information for VLAN 1:
Console#show vlan id 1
Default VLAN ID : 1
VLAN ID:
Type:
Name:
Status:
Ports/Port Channels:
Console#
4-232
Table 4-62 Show VLAN Commands
Function
Shows VLAN information
Displays status for the specified VLAN interface
Displays the administrative and operational status of an
interface
1
Static
DefaultVlan
Active
Eth1/ 1(S) Eth1/ 2(S) Eth1/ 3(S) Eth1/ 4(S) Eth1/ 5(S)
Eth1/ 6(S) Eth1/ 7(S) Eth1/ 8(S) Eth1/ 9(S) Eth1/10(S)
Eth1/11(S) Eth1/12(S) Eth1/13(S) Eth1/14(S) Eth1/19(S)
Eth1/20(S) Eth1/21(S) Eth1/22(S) Eth1/23(S) Eth1/24(S)
Eth1/25(S) Eth1/26(S)
Trunk 1(S)
www.digisol.com
Mode Page
NE, PE 4-232
NE, PE 4-157
NE, PE 4-159