Authorization Exec; Show Accounting - Digisol DG-FS4526 Management Manual

4
Command Line Interface

authorization exec

This command applies an authorization method to local console or Telnet
connections. Use the no form to disable authorization on the line.
Syntax
authorization exec {default | list-name}
no authorization exec
• default - Specifies the default method list created with the aaa
authorization exec command (page 4-95).
• list-name - Specifies a method list created with the aaa authorization exec
command.
Default Setting
None
Command Mode
Line Configuration
Example
Console(config)#line console
Console(config-line)#authorization exec tps
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#authorization exec default
Console(config-line)#

show accounting

This command displays the current accounting settings per function and per port.
Syntax
show accounting [commands [level] | [dot1x [statistics [username
user-name | interface]] | exec [statistics] | statistics]
• commands - Displays privilege level commands accounting information.
• level - The CLI command privilege level. (Range: 0-15)
• dot1x - Displays dot1x accounting information.
• exec - Displays Exec accounting records.
• statistics - Displays accounting records.
• user-name - Displays accounting records for a specifiable username.
• interface
ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-26)
Default Setting
None
4-96
www.digisol.com