Mac-Authentication Intrusion-Action; Mac-Authentication Max-Mac-Count - Digisol DG-FS4526 Management Manual

4
Command Line Interface
Command Mode
Interface Configuration
Command Usage
The maximum number of MAC addresses per port is 2048, and the maximum
number of secure MAC addresses supported for the switch system is 1024.
When the limit is reached, all new MAC addresses are treated as
authentication failed.
Example
Console(config-if)#network-access max-mac-count 5
Console(config-if)#

mac-authentication intrusion-action

Use this command to configure the port response to a host MAC authentication
failure. Use the no form of this command to restore the default.
Syntax
mac-authentication intrusion-action [block traffic | pass traffic]
no mac-authentication intrusion-action
Default Setting
Block Traffic
Command Mode
Interface Config
Example
Console(config-if)#mac-authentication intrusion-action block-traffic
Console(config-if)#

mac-authentication max-mac-count

Use this command to set the maximum number of MAC addresses that can be
authenticated on a port via 802.1X authentication or MAC authentication. Use the no
form of this command to restore the default.
Syntax
mac-authentication max-mac-count count
no mac-authentication max-mac-count
count - The maximum number of 802.1X and MAC-authenticated MAC
addresses allowed. (Range: 1-1024)
Default Setting
1024
Command Mode
Interface Config
4-110
www.digisol.com