Lldp Medtlv Med-Cap; Lldp Medtlv Network-Policy - Digisol DG-FS4526 Management Manual

4
Command Line Interface
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises location identification details.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp medtlv location
Console(config-if)#

lldp medtlv med-cap

This command configures an LLDP-MED-enabled port to advertise its Media
Endpoint Device capabilities. Use the no form to disable this feature.
Syntax
[no] lldp
medtlv med-cap
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises LLDP-MED TLV capabilities, allowing Media Endpoint
and Connectivity Devices to efficiently discover which LLDP-MED related TLVs
are supported on the switch.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp medtlv med-cap
Console(config-if)#

lldp medtlv network-policy

This command configures an LLDP-MED-enabled port to advertise its network
policy configuration. Use the no form to disable this feature.
Syntax
[no] lldp
medtlv network-policy
Default Setting
Enabled
4-194
www.digisol.com