Configuring Igmp Filtering And Throttling For Interfaces; Figure 3-138 Igmp Profile Configuration - Digisol DG-FS4526 Management Manual

3
Configuring the Switch
Web – Click IGMP Snooping, IGMP Filter Profile Configuration. Select the profile
number you want to configure; then click Query to display the current settings.
Specify the access mode for the profile and then add multicast groups to the profile
list. Click Apply.
CLI – This example configures profile number 19 by setting the access mode to
"permit" and then specifying a range of multicast groups that a user can join. The
current profile configuration is then displayed.
Console(config)#ip igmp profile 19
Console(config-igmp-profile)#permit
Console(config-igmp-profile)#range 239.1.2.3
Console(config-igmp-profile)#range 239.2.3.1 239.2.3.200
Console(config-igmp-profile)#end
Console#show ip igmp profile 19
IGMP Profile 19
permit
range 239.1.2.3 239.1.2.3
range 239.2.3.1 239.2.3.200
Console#

Configuring IGMP Filtering and Throttling for Interfaces

Once you have configured IGMP profiles, you can assign them to interfaces on the
switch. Also you can set the IGMP throttling number to limit the number of multicast
groups an interface can join at the same time.
Command Usage
• Only one profile can be assigned to an interface.
3-218

Figure 3-138 IGMP Profile Configuration

www.digisol.com
4-287
4-288
4-288
4-291