Lldp Basic-Tlv System-Name; Lldp Dot1-Tlv Proto-Ident - Digisol DG-FS4526 Management Manual

4
Command Line Interface
Syntax
[no] lldp basic-tlv system-description
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The system description is taken from the sysDescr object in RFC 3418, which
includes the full name and version identification of the system's hardware type,
software operating system, and networking software.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv system-description
Console(config-if)#

lldp basic-tlv system-name

This command configures an LLDP-enabled port to advertise the system name. Use
the no form to disable this feature.
Syntax
[no] lldp basic-tlv system-name
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The system name is taken from the sysName object in RFC 3418, which
contains the system's administratively assigned name, and is in turn based on
the hostname command (page 4-25).
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv system-name
Console(config-if)#

lldp dot1-tlv proto-ident

This command configures an LLDP-enabled port to advertise the supported
protocols. Use the no form to disable this feature.
4-188
www.digisol.com