Re-Authenticating Web Authenticated Ports; Network Access - Mac Address Authentication; Figure 3-57 Web Authentication Port Re-Authentication - Digisol DG-FS4526 Management Manual

3
Configuring the Switch
CLI – This example displays web authentication parameters for port 1/5.
Console#show web-auth interface ethernet 1/5
Web Auth Status
Host Summary
IP address
--------------- -------------- ----------------------
Console#

Re-authenticating Web Authenticated Ports

The switch allows an administrator to manually force re-authentication of any
web-authenticated host connected to any port.
Command Attributes
• Interface – Indicates the ethernet port to query.
• Host IP – Indicates the IP address of the host selected for re-authentication.
Web – Click Security, Web Authentication, Re-authentication.
CLI – This example forces the re-authentication of all hosts connected to port 1/5.
Console#web-auth re-authenticate interface ethernet 1/5
Failed to reauth .
Console#
Network Access
Some devices connected to switch ports may not be able to support 802.1X
authentication due to hardware or software limitations. This is often true for devices
such as network printers, IP phones, and some wireless access points. The switch
enables network access from these devices to be controlled by authenticating
device MAC addresses with a central RADIUS server.
Note:
MAC authentication, web authentication, 802.1X, and port security cannot be
configured together on the same port. Only one security mechanism can be
applied.
3-84
: Enabled
Web-Auth-State Remaining-Session-Time

Figure 3-57 Web Authentication Port Re-authentication

– MAC Address Authentication
www.digisol.com
4-119
4-119