Displaying Device Statistics - Digisol DG-FS4526 Management Manual

3
Configuring the Switch
CLI – This example displays LLDP information for an LLDP-enabled remote device
attached to a specific port on this switch.
Console#show lldp info remote-device detail ethernet 1/5
LLDP Remote Devices Information Detail
---------------------------------------------------------------
Local PortName
Chassis Type
Chassis Id
PortID Type
PortID
SysName
SysDescr
PortDescr
SystemCapSupported : Bridge
SystemCapEnabled
Remote Management Address :
192.168.1.2 (IPv4)
Remote Port VID : 1
Remote VLAN Name :
VLAN-1 : DefaultVlan
VLAN-4093 :
Remote Protocol Identity (Hex) :
88-CC
Remote MAC/PHY configuration status :
Remote port auto-neg supported : Yes
Remote port auto-neg enabled : Yes
Remote port auto-neg advertised cap (Hex) : 6C00
Remote port MAU type : 16
Remote Link Aggregation :
Remote link aggregation capable : Yes
Remote link aggragation enable : No
Remote link aggragation port id : 0
Remote Max Frame Size : 1522
Console#

Displaying Device Statistics

Use the LLDP Device Statistics screen to display aggregate statistics about all
LLDP-enabled device connected to this switch.
3-178
: Eth 1/5
: MAC Address
: 00-17-7C-0A-E2-F1
: MAC Address
: 00-17-7C-0A-E2-F8
:
: DG-FS4552
: Ethernet Port on unit 1, port 7
: Bridge
www.digisol.com
4-198