Lldp Medtlv Inventory; Lldp Medtlv Location - Digisol DG-FS4526 Management Manual

Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises extended Power-over-Ethernet capability details, such
as power availability from the switch, and power state of the switch, including
whether the switch is operating from primary or backup power (the Endpoint
Device could use this information to decide to enter power conservation
mode). Note that this device does not support PoE capabilities.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp medtlv extpoe
Console(config-if)#

lldp medtlv inventory

This command configures an LLDP-MED-enabled port to advertise its inventory
identification details. Use the no form to disable this feature.
Syntax
[no] lldp
medtlv inventory
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises device details useful for inventory management, such
as manufacturer, model, software version and other pertinent information.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp medtlv inventory
Console(config-if)#

lldp medtlv location

This command configures an LLDP-MED-enabled port to advertise its location
identification details. Use the no form to disable this feature.
Syntax
[no] lldp
medtlv location
www.digisol.com
DG-FS4526 User Manual
4
4-193