Configuring Web Authentication For Ports; Figure 3-55 Web Authentication Port Configuration - Digisol DG-FS4526 Management Manual

3
Configuring the Switch
CLI – This example globally enables the system authentication control, configures
the session timeout, quiet period and login attempts, and displays the configured
global parameters.
Console(config)#mac-authentication reauth-time 3000
Console(config)#web-auth system-auth-control
Console(config)#web-auth session-timeout 1800
Console(config)#web-auth quiet-period 20
Console(config)#web-auth login-attempts 2
Console(config)#end
Console#show web-auth
Global Web-Auth Parameters
System Auth Control
Session Timeout
Quiet Period
Max Login Attempts
Console#

Configuring Web Authentication for Ports

Web authentication is configured on a per-port basis. The following parameters are
associated with each port.
Command Attributes
• Port – Indicates the port being configured
• Status – Configures the web authentication status for the port.
• Authenticated Host Counts – Indicates how many authenticated hosts are
connected to the port.
Web – Click Security, Web Authentication, Port Configuration.
3-82
: Enabled
: 1800
: 20
: 2

Figure 3-55 Web Authentication Port Configuration

www.digisol.com
4-112
4-117
4-117
4-116
4-116
4-118