Hostname; Banner; Table 4-9 Banner Commands - Digisol DG-FS4526 Management Manual

Command Mode
Global Configuration
Example
Console(config)#prompt RD2
RD2(config)#

hostname

This command specifies or modifies the host name for this device. Use the no form
to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#hostname RD#1
Console(config)#

Banner

These commands are used to configure and manage administrative information
about the switch, its exact data center location, details of the electrical and network
circuits that supply the switch, as well as network administrator and manager contact
information. This information is only available via the CLI and is automatically
displayed before login as soon as a console or telnet connection has been
established.
Command
banner configure
banner configure
company
banner configure
dc-power-info
banner configure
department
banner configure
equipment-info

Table 4-9 Banner Commands

Function
Configures the banner information that is displayed before login GC
Configures the Company information that is displayed by banner GC
Configures the DC Power information that is displayed by
banner
Configures the Department information that is displayed by
banner
Configures the Equipment information that is displayed by
banner
www.digisol.com
DG-FS4526 User Manual
Mode
GC
GC
GC
4
Page
4-26
4-27
4-28
4-28
4-29
4-25