Image Quality; Color Effects (Selecting Image Quality) - Fuji Xerox ApeosPort-II C4300 User Manual

3 Copy

Image Quality

On the [Image Quality] screen, you can configure the document image quality features.
The following shows the reference section for each feature.

Color Effects (Selecting Image Quality).....................................................................................64

Original Type (Selecting the Document Type)...........................................................................65
Image Options (Adjusting Copy Density / Sharpness / Color Saturation of images).................66
Image Enhancement (Erasing the Background Color of Documents/Adjusting contrast) .........67
Color Balance (Adjusting Color Balance) ..................................................................................67
Color Shift (Adjusting Color Tone) ............................................................................................68
1
On the [All Services] screen, select
[Copy].
2
Select the [Image Quality] tab and
then select a feature on the [Image
Quality] screen that appears.
If color reproducibility is poor, perform calibration. For information about calibration, refer to
3
"Executing Calibration" (P.430).
Color Effects (Selecting Image Quality)
If you select an image quality of [Color Effects], the [Image Enhancement], [Image
Options], [Color Shift], and [Color Balance] settings are automatically adjusted and
copies are made at a quality that matches the images.
Note
1
Select [Color Effects].
2
Select the image quality.
Normal
Copies are made with the [Sharpness], [Saturation], [Color Shift], [Color Balance],
[Lighten/Darken] and [Background Suppression/Contrast] settings at their defaults.
Lively
The color saturation is raised to reproduce images that appear fresher and livelier.
Bright
Reproduces images that have a brighter appearance with enhanced contrast. Select
this item to make copies of documents such as posters that are intended to attract
people's attention.
64
• If the settings of other image quality features are changed after selecting an image quality in
[Color Effects], the Color Effects setting will return to its default (state of nothing being
selected).