Fuji Xerox ApeosPort-II C4300 User Manual page 481

Category
Error Code
C P F S M O
016-705
O
016-706
O
016-707
O
016-708
O
016-710 O
016-711 O
016-712
016-713
016-714
016-716
O
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
O [Cause] One of the following may be the cause:
1) You have specified the mailbox registry for scanned
document to the machine, however, the optional Simple
Scan Kit or the optional E-mail Kit may not be installed.
2) You have not used the print driver for this machine.
[Remedy] For 1), press the <All Services> button, and check if [Scan
to PC] is displayed. If [Scan to PC] is displayed, then
check if the scanned document can be stored in the
mailbox. If unable to store in the mailbox, install the
optional Simple Scan Kit, or optional E-mail Kit.
For 2), use the print driver appropriate for this machine.
If the error persists after following the listed solutions,
contact our Customer Support Center.
[Cause] The hard disk space is insufficient because Secure Print
users exceeded the allowed number.
[Remedy] Remove unnecessary documents from the machine, and
delete unnecessary Secure Print users.
For information about Secure Print, refer to "Secure Print" (P.360). For
information about mailboxes, refer to "Printing/Deleting Documents in the
Mailbox" (P.208).
[Cause] Unable to print with the Sample Print feature because a
HDD is unattached or defective.
[Remedy] A HDD is required for the Sample Print feature. If the HDD
is defective, contact our Customer Support Center.
[Cause] Unable to annotate due to insufficient hard disk space.
[Remedy] Remove unnecessary data from the hard disk to increase
free disk space.
[Cause] Unable to register the Delayed Print document because a
HDD is unattached.
[Remedy] A HDD is required for the Delayed Print feature.
O Refer to 016-985.
O Refer to 003-751.
O [Cause] The input password does not agree with the password set
to the mailbox.
[Remedy] Input the correct password.
O [Cause] The specified mailbox does not exist.
{Remedy] Create a new mailbox or specify an existing mailbox.
[Cause] Unable to spool TIFF file due to insufficient hard disk
space.
[Remedy] Remove unnecessary documents and users from the
machine, and then attach the hard disk. For information on
attaching the hard disk, contact our Customer Support
Center.
Refer to "Printing/Deleting Documents in the Mailbox" (P.208).
Cause and Remedy
Error Code
15
479