Preface; Entry Chart For Image Quality Problems - Fuji Xerox DocuPrint M355df Service Manual

Chapter 3 Image Quality Troubleshooting

3.1 Preface

3.1 Preface

3.1.1 Entry Chart for Image Quality Problems

Start
Test Printing
No
Is there a corresponding FIP?
Remove TONER CARTRIDGE, shake
Yes
it several times, and reinstall it.
Carry out the corresponding troubleshooting.
No
The trouble is restored?
No
Yes
The trouble is restored?
End
Yes
End Replace TONER CARTRIDGE,
Drum Cartridge, and FUSING UNIT
one by one.
When an image quality problem occurs during printing, output a sample print to determine and grasp the
nature of the problem and take proper steps, and then perform a troubleshooting efficiently using "3.2 Image
Quality Troubleshooting".
If the problem persists even after the troubleshooting with the Image Quality Troubleshooting, check using the
Image Quality Troubleshooting again, and then replace the "Possible causative parts" listed in the Image
Quality Troubleshooting one by one, and also perform the troubleshooting using "Chapter 6 General" and oth-
ers.
3-1