Fuji Xerox ApeosPort-II C4300 User Manual page 500

15 Problem Solving
Error Code
C P F S M O
027-523
027-524
027-525
027-526
15
027-527
027-528
027-529
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
498
Category
O [Cause]
[Remedy] Take one of the following actions:
O [Cause]
[Remedy] Check if the specified name is being used for another file
O [Cause]
[Remedy] Check whether or not the file is not being used by another
O [Cause]
[Remedy] If any lock directory (.LCK) exists in the forwarding
O [Cause]
[Remedy] Check whether or not the file is not being used by another
O [Cause]
[Remedy] Check if the save location has free space.
O [Cause]
[Remedy] Log in from another computer using the same user
Cause and Remedy
During the transfer via SMB of [Scan to PC], unable to
create a lock folder on the SMB server due to the following
reason:
The specified lock folder already exists.
If any lock directory(.LCK) exists in the forwarding
destination, manually delete it, then try again.
Check if the specified name is being used for another
folder.
Check if the folder exists.
During the transfer via SMB of [Scan to PC], unable to
create a folder on the SMB server, because the specified
folder already exists.
or folder on the SMB server.
During the transfer via SMB of [Scan to PC], unable to
delete a file on the SMB server due to the following
reasons:
The file does not exist.
The file is being opened.
The specified file name is being used as the directory.
user at the specified save location.
During the transfer via SMB of [Scan to PC], unable to
delete a lock folder on the SMB server due to the following
reasons:
The file does not exist.
The directory is not empty.
The specified directory name does not exist.
destination, manually delete it, then try again.
During the transfer via SMB of [Scan to PC], unable to
delete a folder on the SMB server due to the following
reasons:
The file does not exist.
The directory is not empty.
The specified directory name does not exist.
user at the specified save location.
During the transfer via SMB of [Scan to PC], no space is
available at the save location on the SMB server.
During the transfer via SMB of [Scan to PC], an
unexpected error has been received from the SMB server,
or an unexpected internal machine error has occurred.
information, then check if the file can be written at the
same save location on the SMB server. Then try again. If
the error persists, it may be an internal error. Contact our
Customer Support Center.