Fax Billing Data; Passcode Entry From Control Panel; Login Setup/Auditron Mode - Fuji Xerox ApeosPort-II C4300 User Manual

10 System Settings
Note

Fax Billing Data

You can make settings for the fax billing.
Important • In order to register the billing data, enable the fax feature for the Login Setup/Auditron
Note
1
Enter the System Administration
mode.
For details on how to enter the System
Administration mode, refer to System
Settings Procedure (P.258).
2
Select [Fax Billing Data] and select
[Change Rate Per Unit].
Charge Rate Per Unit
This is a communication charge per unit.
3
Select [Change Settings].
4
Enter an amount using the
keyboard displayed on the screen
or the numeric keypad.
5
Select [Save].

Passcode Entry from Control Panel

You can set whether a passcode is required when the system administrator or a user
uses the machine. Select [On] to enable System Administrator's Passcode (P.342),
and Passcode (P.345) for [Create/Check User Accounts].
Select [Off] to not require the passcode, even if a passcode is set in the above
procedures.
Important • The setting of [Passcode Entry from Control Panel] is used for authentication on the
10
Note

Login Setup/Auditron Mode

Set whether the Auditron administration feature is enabled or not, and whether to
request an authentication operation.
350
• When [Save in Charge Print] is selected, the Security Print, Sample Print, and Delayed Print
settings specified on the print driver will be ignored.
Administration prior to the operations. For details on how to enable the fax feature, refer to
Auditron Mode (P.351).
• Set the communications time per unit charge in each time band (daytime/night/midnight) in
[Billing]. For information on how to set [Billing], refer to Billing - Day Time, Billing - Night
Time, Billing - Midnight (P.338).
• The registered details can be confirmed by printing the [Billing Data List]. For information
about how to print, refer to Billing Data List (P.382).
machine. A password must always be entered when accessing from remote devices using
CentreWare Internet Services or the like, regardless of the use of password setting.
Depending on authentication procedures, a passcode may be required for other processes
as well.
• The system administrator's password is also required when you change settings from
CentreWare Internet Services.