Fuji Xerox ApeosPort-II C4300 User Manual page 478

Hide thumbs Also See for ApeosPort-II C4300:
Table of Contents

Advertisement

15 Problem Solving
Error Code
C P F S M O
016-578
016-579
016-580
016-581
016-582
15
016-583
016-584
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
476
Category
O
[Cause]
[Remedy] Check if the login name (user name) and password are
O
[Cause]
[Remedy] Check if the scanned image save location on the server is
O
[Cause]
[Remedy] Check the access privilege of the FTP server.
O
[Cause]
[Remedy] Change the file name, or change the forwarding folder on
O
[Cause]
[Remedy] Take one of the following actions:
O
[Cause]
[Remedy] Take one of the following actions:
O
[Cause]
[Remedy] Take one of the following actions:
Cause and Remedy
Unable to log in to the FTP server during the transfer via
FTP of [Scan to PC].
correct.
During the transfer via FTP of [Scan to PC], unable to
forward the scanned image to the save location after
establishing the connection to the FTP server.
correct.
During the transfer via FTP of [Scan to PC], unable to
obtain the file name or folder name of the FTP server after
establishing the connection to the FTP server.
During the transfer via FTP of [Scan to PC], the suffix of
the file name or the folder name exceeds its limit on the
server after establishing a connection to the FTP server.
the FTP server. Or, move or delete files in the forwarding
folder.
During the transfer via FTP of [Scan to PC], unable to
create a file on the FTP server after establishing a
connection to the FTP server.
Check if the specified file name can be used in the save
location.
Check if enough space is available in the save location.
During the transfer via FTP of [Scan to PC], unable to
create a lock folder on the FTP server after establishing a
connection to the FTP server.
If any lock directory (.LCK) exists in the forwarding
destination, delete it manually, then try executing the job
again.
Check if the specified file name can be used in the save
location.
Check if the other folder name is the same as the
specified name.
Check if enough space is available in the save location.
During the transfer via FTP of [Scan to PC], unable to
create a folder on the FTP server after establishing a
connection to the FTP server.
Check if the specified file name can be used in the save
location.
Check if the specified name is used for other folder
name
Check if enough space is available in the save location.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucentre-ii c2200Apeosport-ii c3300

Table of Contents