Setting Color Scan From Control Panel; Setting Original Paper Size And File Type; Image Quality - Fuji Xerox DocuPint C2090 FS User Manual

1. In Scan mode, press the <Scan> button, and use the <◄/►> buttons to choose the destination to
which an image is scanned.
2. You can scan to one of the following destinations:
• USB-Key memory flash disk
• PC-USB (via USB port)
• FTP1~5
3. Press <Set> to confirm your setting.
5.2.2

Setting color scan from control panel

You can choose to scan an image or a document either in B/W or color mode.
When the green light of the <Color Mode> button is on, the machine is set to color mode. To change to Mono
mode, press the <Color Mode> button again and the light will go off.
5.2.3

Setting original paper size and file type

To determine the original paper size to scan, do the following:
1. In [Scan] mode, press the <Size/Type> button on the control panel. Use the <◄/►> buttons to
select [Size/Type- Original size] function.
2. Choose [Original size] and press the <Set> button to configure the settings.
3. Docuprint C2090FS available document size included:
• A4, A5, B5
• Postcard
• 8.5" x 11", 5.5" x 8.5"
• 7.25" x 10.5"
To determine the file type to scan, do the following:
1. In [Scan] mode, press the <Size / Type > button on the control panel. Use the <◄/►> buttons to
select [Size/Type] function.
2. Use the <◄/►> buttons to choose [Size / Type – File Type] and press <Set>.Use the <◄/►> to
choose the original type of the document to scan. You can scan from [Text], [Text & Photo], [Photo]
and [No Filter].
3. Press <Set> to confirm your setting.
5.2.4

Image quality

To configure the brightness of the scanned images, do the following:
1. In [Scan] mode, press the <Image Quality > button on the control panel, it will shown [Image
Quality- ScanResolution] screen
2. Use the <◄/►> buttons to select image brightness. it can support -2 - +2 level
3. Press <Set> button to confirm your choice.
To configure the scan resolution of the scanned images, do the following:
1. In [Scan] mode, press the <Image Quality > button on the control panel, it will show [Image Quality-
ScanResolution] screen the press <Set> to star image resolution setting.
All manuals and user guides at all-guides.com
- 48 -