System Administrator Settings; System Administrator Login Id; System Administrator's Passcode - Fuji Xerox ApeosPort-II C4300 User Manual

10 System Settings

System Administrator Settings

In [System Administrator Settings], you can set the system administrator ID and
password.
You are recommended to set the system administrator ID and password to prevent
setting changes and ensure security.
The following shows the reference section for each item.
1
In the [System Settings] screen, select [System Administrator Settings].
For the method of displaying the [System Settings] screen, refer to System Settings Procedure (P.258).
2
Select any item.

System Administrator Login ID

Set the system administrator user ID. Enter the ID from 1 to 32 characters.
Note
1
Select [System Administrator Login
ID].
2
Select [On].
3
Select [Keyboard], then in [New
System Administrator Login ID],
enter the system administrator ID, and select [Save].
4
Select [Keyboard] once more, and in [Re-enter System Administrator Login ID], enter
the same system administrator ID, and select [Save].
5
Select [Save].

System Administrator's Passcode

Set the passcode for System Administration mode.
Setting a passcode is strongly recommended for security.
Note
The system administrator password becomes valid when [Passcode Entry from Control
10
Panel] in [Login Setup/Auditron Administration] is [On].
Set the password after setting the system administrator User ID.
You can set the passcode from 4 to 12 numeric digits.
For information about enabling and disabling passwords, refer to Passcode Entry from Control Panel
(P.350).
1
Select [System Administrator
Password].
2
Select [Keyboard].
342
System Administrator Login ID................................................................................................342
System Administrator's Passcode.............................................................................................342
Maximum Login Attempts........................................................................................................343
• The default of the system administrator user ID is "11111".
• The default of the system administrator password is "x-admin".