Fuji Xerox ApeosPort-II C4300 User Manual page 620

17 Glossary
Resolution
ROM
ROS
Scan
Screen
Select
Send Password
Sender
Separator
Side Tray
SMTP
17
Start Reservation
Status Display Code
Store
Stored Programming
Super G3 (SG3)
Transmission Interval
Transparency Copy
618
Term
Represents a fineness of detail that can be distinguished on
an image. It is usually described in terms of the number of dots
per square inch (dpi), and a higher value indicates a higher
resolution (finely represented).
Read Only Memory. It is a storage device (memory) specific
for the retrieval of information.
Raster Output Scanner. It is a device for writing image signals
to a drum (light sensitive). A ROS is often referred to as a laser
beam scanner.
Sensing or reading a paper document and converting the
optical image of the document to an electronic image.
The machine offers two scanning devices: document glass
and document feeder.
The screen that is displayed on the touch screen. It displays
messages and feature buttons.
In this document, "Select" refers to highlighting a feature
selection by touching the feature button on the touch screen
with your finger.
This feature requires to enter an "S" and the ID of a remote
terminal after entering its fax number. This prevents
transmission errors.
Originator of a communication. It is used as opposed to
"recipient".
A blank, colored, or copied paper inserted between sections or
topics in a set of documents.
A feature that outputs copies to the side tray with the copied
face up.
Simple Mail Transfer Protocol.
A communications protocol (an agreement governing the way
data is transmitted) commonly used for sending and receiving
e-mail.
In this guide, this refers to loading a document, selecting
features, and pressing the <Start> button immediately after
switching the power on. Once the machine is warmed up and
ready, it will automatically start copying.
A code that indicates the machine status. When an error
occurs on the machine, a status display code appears on the
touch screen.
In this guide, it is referred to as scanning an image of a
document and saving the image on the machine.
By registering a series of operations, the machine executes
the operations with just one press of [Stored Programming] on
the touch screen.
A G3 communication system conforming to ITU V.34.
This system offers higher transmission speed (33.6 kbps) than
the normal G3 mode.
The period between transmissions.
A feature that copies on transparency films or inserts a sheet
of blank or copied paper between transparency films.
Description