Fuji Xerox ApeosPort-II C4300 User Manual page 47

3
Select [Services].
4
Select [Stored Programming].
Note • The layout of buttons in this
• You cannot assign the same feature to more than one button.
Services
You can select a feature button. The service buttons are the oval buttons in the [All
Services] screen.
If you select [Not Set], the selected button position will remain empty.
Additional Features
You can select an additional feature button. The auxiliary features appear in the [All
Services] screen as rectangular buttons.
If you select [Not Set], the selected button position will remain empty.
Assigning Features to <Custom> Buttons
Assign features to the <Custom> buttons on the control panel: Custom 1 to Custom 3.
By assigning features to the <Custom> buttons, you can switch to the features without
returning to the [All Services] screen. To leave a feature unassigned, select [Not Set].
As the factory defaults, [Copy] is assigned to the <Copy> button. No feature is assigned
to the <Custom 2> and <Custom 3> buttons. The features assigned to the buttons are
selected from the features displayed on the [All Services] screen and [Language].
Attach the labels included in this product when you have changed the assignment. If
you have used a feature for which no label is provided, use a blank label and write down
the feature using a permanent marker, and then attach the label to the appropriate
button.
The following is the procedure to assign [Send from Mailbox] to the <Custom 2> button,
as an example. The same procedure can be applied to the <Custom 3> button.
1
Select [Custom Button 2], and
select [Change Settings].
2
Select [Send from Mailbox].
Note • Select [
Changing the Feature Screen
You can customize the selectable feature display of the setting screen for the following
features on the [All Services] screen.
Copy
Fax/Internet Fax
E-mail
Scan to Mailbox
Scan to PC
For information on how to change the settings, refer to "Copy Tab" (P.292), "General Settings Tab"
(P.308), and "Screen Defaults" (P.313).
screen is corresponding to the
layout of those on the [All
Services] screen when
pressing the <All Services> button.
] to return to the
previous screen or [ ] to
move to the next screen.
Control Panel
2
45