Fuji Xerox ApeosPort-II C4300 User Manual page 283

Secure Watermark Control
Secure Watermark Detection
Set whether or not to detect a copying restriction code embedded in a document.
Digital Codes Settings
Decoding Passcode
You can set the decoding passcode for a digital code to be embedded in a document. Setting
the decoding passcode allows you to restrict access to a digital code analysis application.
Note • To analyze digital codes, the application ApeosWare Secure Watermark Analyzer (optional)
is required. For information on how to operate Paper Security Analyzer, refer to the
documentation provided with the application.
Important • Be sure to place strict controls on the decoding passcode. If you forget the specified
decoding passcode or your passcode entry does not match that registered on ApeosWare
Secure Watermark Analyzer, you will not be able to analyze the digital code on ApeosWare
Secure Watermark Analyzer.
1
Select [Decoding Passcode].
2
Select [Change Settings].
3
Select [Keyboard].
4
Enter a new passcode of 4 to 12
characters in [Re-enter Password],
and select [Next].
5
Select [Keyboard].
6
Enter the same password in [Re-enter Password], and select [Save].
Note • To set no password, leave the password blank, and select [Save].
Custom Text
Specify a digital code string to be embedded in a document. You can enter up to 32
characters.
For information about how to enter characters, refer to Entering Text (P.271).
Force Secure Watermark
Copy Job
Set whether or not to force to use the Secure Watermark feature when copying a document.
Client Print
Set whether or not to force to use the Secure Watermark feature when printing from a client
computer.
Mailbox Print
Set whether or not to force to use the Secure Watermark feature when printing a document in
a mailbox.
Incoming Fax Print
Set whether or not to force to use the Secure Watermark feature when printing a document
received by fax.
Report/List
Set whether or not to force to use the Secure Watermark feature when printing a report/list.
Secure Watermark Defaults
Protection Code
Set whether or not to embed a protection code in a document. Any document from which the
protection code was detected cannot be copied, scanned, or faxed.
Common Settings
10
281