Fuji Xerox ApeosPort-II C4300 User Manual page 44

2 Product Overview
No. Component
11 <Interrupt> button/indicator Press this button to temporarily stop a continuous copy job or printing to
12 <Stop> button
13 <Start> button
14 Numeric keypad
15 <Speed Dial> button
2
16 <C (Clear)> button
17 <Dial Pause> button
18 <Custom> buttons
(<Copy>, <Custom 2>,
<Custom 3> buttons)
19 <All Services> button
20 One touch button panels
21 One touch buttons
42
give another job higher priority. During an interrupt, the interrupt
indicator lights up. Pressing the <Interrupt> button again cancels the
interrupt and the previous operation is resumed.
In this manual, this button is indicated as the <Interrupt> button.
Some jobs cannot be executed during the interruption. For detail information,
refer to "Notes and Restrictions in the Interrupt Mode" (P.600).
Press this button to stop the current copy job or communications.
In this manual, this button is indicated as the <Stop> button.
Press this button to start copying or scanning.
In this manual, this button is indicated as the <Start> button.
Press these buttons to enter the number of copies, passwords and other
numerical values.
In this manual, these buttons are indicated as the "numeric keypad".
Used to specify a destination phone number for fax or e-mail.
In this manual, this button is indicated as the <Speed Dial> button.
Press this button if you have entered the wrong numerical value with the
numeric keypad.
In this manual, this button is indicated as the <C> button.
Used to insert a pause into a destination number.
In this manual, this button is indicated as the <Dial Pause> button.
Used to call a custom feature.
You can assign a feature to the buttons selected from the features
displayed on the [All Services] screen and [Language].
For information on registering a feature with a button, refer to "Screen/Button
Settings" (P.276).
Used to display the [All Services] screen.
In this manual, this button is indicated as the <All Services> button.
You can change the features that appear in the <All Services> screen. For detail
information, refer to "Screen/Button Settings" (P.276).
Panels for one touch buttons.
You can leaf through panels to display 001 to 030, 031 to 060, and 061
to 070. M01 to M20 are reserved for the stored programming feature.
These buttons correspond to jobs registered in 01 to 20.
Note • This feature is not available for some models. An optional package
is necessary. For more information, contact our Customer Support
Center.
Specify a recipient with one button. These buttons are available for fax
and iFax.
Registered preset recipient numbers 001 to 070 are supported.
Function