Xerox Standard Accounting - Fuji Xerox ApeosPort-II C4300 User Manual

1
Select [Login Setup/Auditron
Mode].
2
Select any item.
Off
No user login setup/auditron administration is required to operate the machine.
Note • When [Off] is selected, [Auditron Mode] and [Mailbox Access] are disabled even if they are
set to [On].
Local Machine Access
The auditron administration is carried out using the authenticated users already registered on
the machine.
For information about authentication on the machine, refer to Authentication and Auditron
Administration (P.401).
Network Access
Auditron administration is carried out using user information managed by the remote service.
User information is registered by the remote service.
For information about net authentication, refer to Authentication and Auditron Administration (P.401).
Note • When [Network Access] is set in the [Login Setup/Auditron Mode] screen which appears
when the <Log In/Out> button on the control panel is pressed, you can enter the account ID.
Check User Details
Select whether to check user details. If [Off (Keep logon records)] is selected, [User ID] and
[Account ID] must be entered. The entered information is not verified, but is logged onto the
machine. Select [On] to verify user information.
The following items are common settings for each verification feature.

Xerox Standard Accounting

Carries out the auditron authentication based on accounting users registered on the
machine.
Auditron Mode
Select whether to use the auditron administration feature when using the copy, fax, scan, and
print services. Note that Login Setup/Auditron Administration cannot be used unless the
system administrator user ID is set.
For information about the items you can manage, refer to Authentication and Auditron Administration
(P.389).
Note • To set the fax charging data, be sure to select [Exit] to exit the System Administration mode,
then once again enter the System Administration mode to make the settings.
• The items appearing depend on the services provided.
Copy Service
Set whether to enable the Login Setup/Auditron Administration feature for copy operations.
Fax Service
Set whether to enable the Login Setup/Auditron Administration feature for fax and iFax
operations.
Scan Service
Set whether to enable the Login Setup/Auditron Administration feature for scan operations.
Print Service
Set whether to enable the Login Setup/Auditron Administration feature for print operations.
Login Setup/Auditron Administration
10
351