Step 4 Starting The Copy Job - Fuji Xerox ApeosPort-II C4300 User Manual

1
Enter the number of copies using
the numeric keypad. The number
of copies entered appears on the
upper right of the touch screen.
2
If you enter an incorrect value,
press the <C> button and then
enter the correct value.

Step 4 Starting the Copy Job

1
Press the <Start> button.
Important • If the document has been set
• Copies cannot be made when
Note • If a problem occurs, an error
• You can set the next job during copying.
If you have more documents
If you have another document, select [Next Original] on the touch screen while the
current document is being scanned. You can scan multiple documents for later output.
2
Select [Next Original] while
scanning is in progress.
Note • When using the document feeder, load the next document after the machine has finished
• When the above screen is displayed and no operation is performed during a certain period
in the document feeder, do not
hold down the document while
it is being conveyed.
copying restriction code is
detected.
message appears in the touch
screen. Solve the problem in accordance with the message.
scanning the first document.
of time, the machine automatically assumes that there are no more documents.
Copying Procedure
1 2 3
4 5 6
7 8 9
0 #
C
1 2 3
4 5 6
7 8 9
0 #
C
1 2 3
4 5 6
7 8 9
0 #
C
Numeric keypad
<C> button
3
<Start> button
51