Scan To Pc; Transfer Protocol; Address Book - Fuji Xerox ApeosPort-II C4300 User Manual

Scan to PC

You can convert scanned data to TIFF, JPEG, DocuWorks, or PDF format, and then
use the FTP or SMB protocol to send the data to a computer on the network. The
following shows the reference section for each feature.
Note • Before scanning, a shared folder must be created on the computer for saving scanned data.
• This feature does not appear for some models. An optional package is necessary. For more

Transfer Protocol...................................................................................................................... 181

Address Book ........................................................................................................................... 181

Forwarding Specification ......................................................................................................... 182
1
Select [Scan to PC] from the [All
Services] screen.
2
Specify a forwarding destination on
the [Scan to PC] screen.
Note • Fields displayed vary depending on the protocol.
Transfer Protocol
You can select a transfer protocol using the following procedure.
1
Select [Transfer Protocol].
2
Select any item.
FTP
Transfers using the FTP protocol.
SMB
Transfers using the SMB protocol.
SMB (UNC Format)
Transfers using the SMB protocol (UNC Format).
Address Book
You can specify the server name, user name and other information from the address
book.
For information on settings of the address book, refer to "Address Book (Address Number)" (P.334).
If the FTP protocol is used, the FTP service must be set. For information on the computer
settings, refer to the documentation supplied with your operating system. For information on
compatible operating systems, refer to "Scan Feature Specifications" (P.558).
information, contact our Customer Support Center.

Scan to PC

5
181