Fuji Xerox ApeosPort-II C4300 User Manual page 454

15 Problem Solving
Unable to make color
copies.
The document edges are
missing on the copy.
Colors differ between the
original and the copy.
Documents are not
stapled.
15
452
Cause [Output Color] is set to [Black].
No Action Set [Output Color] to [Auto Detect] or [Color].
Refer to "Output Color (Selecting the Color to Copy)" (P.60).
Cause The document is larger than the printable area.
No Action Adjust [Reduce/Enlarge] to make the copy smaller.
Cause Tonal reproduction is misconfigured.
No Action Perform calibration.
Refer to "Executing Calibration" (P.430).
Cause A document type appropriate for this document is not selected.
Action In [Original Type], select a type appropriate for the document.
Refer to "Original Type (Selecting the Document Type)" (P.65).
Cause The Finisher is not attached.
Action A finisher is needed to perform stapling. Attach the Finisher, or
change the print option setting to cancel stapling.
Cause The number of pages to staple exceeds 50.
Action A maximum of 50 pages can be stapled. Reduce the number
of pages to 50 or less.