Paper Jams At 2A In The Finisher (Using The Wheel 2C) - Fuji Xerox ApeosPort-II C4300 User Manual

15 Problem Solving

Paper Jams at 2a in the Finisher (Using the Wheel 2c)

1
If the edge of the jammed paper
comes out from the exit of the
output tray, gently pull out the
paper to remove.
2
Open the front cover of the finisher.
3
Move the lever 2a to the right.
15
4
Turn the wheel 2c in the direction
of the arrow to eject the jammed
paper.
5
Gently remove the paper.
6
Return the lever 2a to its original position.
7
Close the front cover of the finisher.
Note
536
• A message will be displayed and the machine will not operate unless the front cover is
completely closed.