Fuji Xerox ApeosPort-II C4300 User Manual page 509

Category
Error Code
C P F S M O
033-741
O
033-742
033-743
O
033-744
033-745
033-746
033-747
O
033-749
O
033-750
O
033-751
O
033-755
O
034-211
O
034-212
034-500
O
034-501
O
034-505
O
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
Cause and Remedy
[Cause] An error occurred during fax transmission.
[Remedy] Try again. If the machine conditions are not improved by
performing the relevant remedy, contact our Customer
Support Center.
[Cause] An error occurred during fax transmission.
[Remedy] Turn the machine off and on. If the machine conditions are
not improved by performing the relevant remedy, contact
our Customer Support Center.
[Cause] The job is in pending status.
[Remedy] No operation is necessary.
[Cause] The machine will automatically resume and print out.
[Remedy] No operation is necessary.
[Cause] An error occurred during fax transmission.
[Remedy] Turn the machine off and on. If the machine conditions are
not improved by performing the relevant remedy, contact
our Customer Support Center.
[Cause] The print job was suspended. The Activity Report cannot
be printed during the printing operation restricted time.
[Remedy] No action needs to be taken. Printing will resume
automatically once the printing operation restricted time is
over.
[Cause] Although the fax document print job was sent, the print job
was suspended, because the fax feature did not function
properly. When printing different types of documents such
as print, scan, or fax from a mailbox, if one of those
documents is a fax document, none of the other
documents will be printed after the fax document is being
processed.
[Remedy] Take one of the following actions:
Turn the machine off and on.
Check if the phone cable connection is secured.
Print out the Error History Report, and obtain the error
code. Refer to the error code listing relating to faxing
(133-xxx, 134-xxx) to take an appropriate action.
If the error persists, contact our Customer Support Center.
[Cause] An error occurred on the fax control system.
[Remedy] Contact our Customer Support Center.
[Cause] Unable to communicate due to an incorrect phone number.
[Remedy] Check the phone number, and try again.
[Cause] The telephone line (modular jack) may not be correctly
connected.
[Remedy] Check the telephone line connection, and try again.
Refer to "Telephone Line Connectors" (P.32).
[Cause] An error occurred during fax transmission.
[Remedy] Turn the machine off and on. If the machine conditions are
not improved by performing the relevant remedy, contact
our Customer Support Center.
Error Code
15
507