Scanning Procedure; Step 1 Loading Documents - Fuji Xerox ApeosPort-II C4300 User Manual

5 Scan

Scanning Procedure

This section describes the basic scanning procedure. The following shows the
reference section for each step.

Step 1 Loading Documents .......................................................................................................166

Step 2 Selecting Features ..........................................................................................................168
Step 3 Starting the Scan Job......................................................................................................170
Step 4 Confirming the Scan Job in Job Status ..........................................................................171
Step 5 Saving the Scanned Data ...............................................................................................171
Step 1 Loading Documents
There are two methods for loading documents:
Document Feeder
Single sheet
Multiple sheets
Document Glass
Single sheet
Bound documents, such as books
Document Feeder
5
The document feeder supports single and multiple sheet documents with sizes from
139.7 x 210 mm (A5, 5.5 x 8.5 inches) to 297 x 432 mm (A3, 11 x 17 inches).
The document feeder automatically detects standard size documents. For non-
standard size documents, input the size in the [Original Size] screen.
For information on entering document sizes, refer to "Original Size (Specifying an Original Size)"
(P.196).
Note
The document feeder accepts the following number of sheets.
Lightweight paper (38 - 49 g/m
Plain paper (50 - 80 g/m
Heavyweight paper (81 - 128g /m
For information on scanning mixed sized documents, refer to "Mixed Sized Originals (Scanning
Different Size Documents Simultaneously)" (P.196).
Important • Place folded or creased documents on the document glass to avoid paper jams.
166
• The standard document sizes that can be detected automatically depend on the [Paper Size
Settings] in the System Administration mode. For information on the paper size settings,
refer to "Paper Size Settings" (P.286).
Document Type (Weight)
2
)
2
)
• 2-sided scanning of lightweight paper (38 - 49 g/m
Number of
Sheets
75 sheets
75 sheets
2
) 50 sheets
2
) is not supported.