Fuji Xerox ApeosPort-II C4300 User Manual page 442

15 Problem Solving
Unsatisfactory
print quality.
Unable to print
text correctly.
(Text is garbled.)
<Online>
indicator lights or
blinks, but
printed paper is
not output.
Unable to insert
or remove a
paper tray.
Unable to copy
with the specified
size.
15
440
Symptom Cause
A probable cause is an
image defect.
Non-standard fonts are
used for printing.
The data remains in
machine memory.
Did you open a cover or turn
the power switch off during
printing?
Is the document glass or the
document cover dirty?
Is the document a
transparent type such as a
transparency film?
Is the document in the
correct position?
Is the document loaded
correctly?
Are the document guides on
the document feeder in the
correct positions?
Is the document folded?
Is the document a non-
standard size?
Remedy
Remedy the problem referring to "Image
Quality Trouble".
Refer to "Image Quality Trouble" (P.443).
Check the application or print driver
settings. If PostScript (optional) is being
used, attach an optional HDD to download
the required fonts.
Cancel printing, or delete the remaining
data.
Refer to "Checking Current/Pending Jobs"
(P.355).
Do not forcibly insert or remove the paper
tray. Turn the power switch off. In a few
seconds, turn the power switch on. When
the machine is ready to receive data, insert
or remove the paper tray.
Clean the document glass and the
document cover.
Refer to "Cleaning the Document Cover and
Document Glass" (P.427).
Place the document on the document
glass, and then place a white sheet over
the document.
Load the document correctly.
Refer to "Step 1 Loading Documents" (P.48).
Adjust the document guide positions.
Refer to "Step 1 Loading Documents" (P.48).
Unfold and correctly place the document.
Refer to "Step 1 Loading Documents" (P.48).
Specify the document size.
Refer to "Original Size (Specifying the Scan
Size for the Document)" (P.72).