Fuji Xerox ApeosPort-II C4300 User Manual page 488

15 Problem Solving
Error Code
C P F S M O
016-798
016-799
016-981
016-982
016-985
15
018-502
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
486
Category
O [Cause]
[Remedy] Attach a HDD, and print again.
O [Cause]
[Remedy] Check the print data and options, and print again.
O [Cause]
[Remedy] Take one of the following actions, and try again:
O [Cause]
[Remedy] Delete unnecessary documents from the machine and
O O [Cause]
[Remedy] Take one of the following actions, and try again:
O [Cause]
[Remedy] Confirm the specified user property information, and check
Cause and Remedy
Unable to print the document because a HDD is
unattached.
An invalid print parameter is included.
Due to the insufficient hard disk space, unable to use
[Scan to PC], the fax document scanning feature, [Secure
Print], and [Sample Print].
Lower the resolution.
Reduce the number of pages, and divide the job into
several jobs.
Delete unnecessary documents, such as the mailbox
documents, scanned fax documents waiting to be sent,
secure print documents, or delayed print documents.
An error occurred due to insufficient hard disk space.
from the mailboxes.
The e-mail size is over the limit.
Reduce the number of document pages.
Reduce the resolution in [Scan Resolution].
Decrease the ratio in [Reduce/Enlarge].
For multivalued scanning, increase the ratio in [Image
Compression].
Ask the System Administrator to increase the value for
[Maximum E-mail Size].
During the transfer via SMB of [Scan to PC], the
computers that are able to log in are limited.
if the server sets the limit on computers to log in.