Fuji Xerox ApeosPort-II C4300 User Manual page 46

2 Product Overview
Customizing the Screen Default
Set the features displayed on the screen that appears after turning the machine on or
canceling the Power Saver mode. This section describes how to set the [Send from
Mailbox] screen as the initial screen, as an example.
1
Select [Screen Default], and select
[Change Settings].
2
Select [Send from Mailbox].
Note
Customizing the Screen after Auto Clear
Customize items displayed on the screen after Auto Clear. You can select from [Last
Selection Screen] and [All Services].
1
Select [Screen After Auto Clear],
2
and select [Change Settings].
2
Select [Last Selection Screen] or
[All Services].
Customizing the [All Services] Screen
You can customize the types of features and the location of buttons on the [All
Services] screen when pressing the <All Services> button on the control panel.
The following is the factory default settings.
Note
Copy
Fax/Internet Fax
E-mail
Scan to Mailbox
Scan to PC
Send from Mailbox
Stored Programming
Language
Setup Menu
Calibration
Print Mode
Fax Receiving Mode
Activity Report
The following is the procedure to change the [Language] button displayed at the upper
right corner of the first page of the [All Services] screen to the [Stored Programming]
button, as an example.
1
Select [All Services], and select
[Change Settings].
2
Select [Language].
Note
44
• Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
• When the feature is not available, the button will not be displayed. Also, if the feature is
unavailable due to hardware problems, the button will be grayed out.
• Select [ ] to return to the
previous screen or [ ] to
move to the next screen.