Mixed Sized Originals (Scanning Different Size Documents Simultaneously) - Fuji Xerox ApeosPort-II C4300 User Manual

4 Fax
Refer to the table in "Paper Size Settings" (P.286) for information on document sizes that can be
automatically detected.
Note
Standard Size
Select a document size from 11 pre-configured types.
You can change the indicated document sizes. For more information, refer to "Original Size Defaults"
(P.310).
Mixed Sized Originals (Scanning Different Size Documents
Simultaneously)
When using the document feeder, you can simultaneously send different size
documents with the sizes matching the respective sizes of the documents. You can
also specify the size of the paper so that faxes are sent at the same paper size.
Important • Originals may not be scanned correctly if the top-left corners are not aligned properly.
4
Note
1
Select [Original Size] on the
[Layout Adjustment] screen.
2
Confirm that [Auto Size Detect] is
selected and select [Save]. If [Auto
Size Detect] is not set, select [Auto
Size Detect], and then select
[Save].
3
Select [Mixed Sized Originals].
4
Select [On].
Off
Select this item when all documents are of the same size.
On
When scanning documents of different sizes, the machine automatically detects the
size of each document.
130
• If the document size cannot be detected automatically, a screen to input the document size
appears.
• The standard document sizes that can be detected automatically depend on the [Paper Size
Settings] in the System Administration mode. For information on the paper size settings,
refer to "Paper Size Settings" (P.286).
• Always load the A5-size documents vertically.
• When loading a B5 size document with A3 or A4 size documents in a vertical direction, place
the B5 document also in a vertical direction.
• The recommended document size combinations are A4 portrait and A3 landscape, or B5
portrait and B4 landscape. If the combination of the document sizes is not our
recommendation, the documents can be fed at an angle may not be copied properly.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• Be sure to set [Scan Size] on the [Layout Adjustment] screen to [Auto Size Detect] when
using mixed sized documents.