Fuji Xerox ApeosPort-II C4300 User Manual page 506

15 Problem Solving
Error Code
C P F S M O
027-752
027-753
027-754
027-761
15
027-762
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
504
Category
O [Cause]
[Remedy] Take one of the following actions:
O [Cause]
[Remedy] Have your System Administrator check the port status.
O [Cause]
[Remedy] Check the DocuWorks and PDF signatures for both the
O [Cause]
[Remedy] When executing an on-demand print job to print multiple
Note
O [Cause]
[Remedy] Try executing the print job again. If the error persists,
Cause and Remedy
A mandatory entry field is blank in the job flow.
Link mailboxes only to job flows that do not have
mandatory entry fields.
Set the default values to the mandatory fields of the job
flow.
Attempted to execute the service when the port necessary
for the job flow is either deactivated or disabled.
The setting contents for [DocuWorks Signature] or [PDF
Signature] on the job flow are not appropriate.
system data settings (machine's current settings) and the
executed job flow settings. If these settings are not the
same, change either of them.
An on-demand print job was sent to the machine using the
remote access feature, however, the time interval of
receiving the print job and starting the print process
exceeded the specified time limit on the machine.
documents using the remote access feature, reduce the
number of documents, then try again. If the error persists,
go to the system administrator mode, then select [System
Settings] > [System Settings] > [Common Settings] >
[Machine Clock/Timers] > [On-Demand Print Duration],
then specify the larger value or "0".
• When executing an on-demand print job to print multiple
documents using the remote access feature, the print
processing time until the last document is being received will be
counted. For this reason, when printing many documents or
documents with data which takes time to be processed, there is
a possibility of time-out even before the last document is being
received. Set the time limit accordingly with the type of
document which needs to be printed. If the error persists,
contact our Customer Support Center.
An on-demand print job is sent to the machine using the
remote access feature, however, the specified job ticket is
invalid:
Abnormal change to the job ticket due to the machine
software failure.
Abnormal change to the job ticket due to a bug on the
sender's remote server
Abnormal change to the job ticket due to network
trouble.
Intentional alteration to the job ticket.
contact our Customer Support Center.