Fuji Xerox ApeosPort-II C4300 User Manual page 549

6
Remove the entire staple sheet
including the jammed staple.
Important • Be sure to remove the entire
staple sheet. Do not remove
the jammed staple only.
7
Pull down the front lever on the
staple cartridge until you hear it
click into place.
8
Return the staple cartridge to its
original position, and pull the lever
down until you hear it click into
place.
9
Close the front cover of the finisher.
Note • A message will be displayed and the machine will not operate unless the front cover is
completely closed.
If the staples cannot be removed after carrying out the above procedures, contact our
Customer Support Center.
Stapler Faults
15
547