Lvps Cooling Fan Removal - Lexmark X940e Service Manual

24V LVPS cooling fan removal
1. Remove the rear cover assembly. See
2. Remove the rear upper cooling fan bracket assembly. See
removal" on page
3. Remove the rear left middle cover. See
4. Remove the 24V LVPS card bracket assembly. See
5. Disconnect the connector from the 24V LVPS cooling fan (A).
6. Remove the two screws securing the 24V LVPS cooling fan (A) to the 24V LVPS card bracket assembly (B).
7. Remove the 24V LVPS cooling fan (A).
Replacement warning: When replacing the 24V LVPS cooling fan (A), ensure that the label is facing up.
"Rear cover assembly removal" on page
4-99.
"Rear left middle cover removal" on page
Connector
A
"Rear upper cooling fan bracket assembly
"24V LVPS card bracket assembly removal" on page
7510-XXX
4-5.
4-6.
4-82.
4-85
Repair information